Haimer > Tool holders and shrinking and balancing machines

Switzerland, Stans – Where chips are flying… tool holding plays an important role in process reliability

 

In 2016 Pilatus Aircraft Ltd installed new manufacturing systems for machining structural parts made of aluminum. In order to achieve the desired surface quality and precision during high speed milling operations, the aircraft manufacturer continuously relies on the solutions provided by HAIMER: a large selection of Tool holders and the corresponding shrinking and balancing machines.

 

The only Swiss aircraft manufacturer

Whenever someone in the precision machining industry talks about flying, one thing is typically brought up: chips. This also applies to Pilatus Aircraft Ltd, the only Swiss aircraft manufacturer. At the headquarters in Stans, Switzerland, everything generally revolves around the topic “flying”, but machining structural parts also plays an important role. In 2016 Pilatus invested in a completely modernized volume-machining system in order to further improve the quality and efficiency of the production. Core elements of the enhanced production are two new flexible manufacturing systems that are run with full automation and guarantee the highest quality in a stable process.

 

Patrik Odermatt (left) and Walter Duss (middle) of the aircraft manufacturer Pilatus and Tobias Völker, tool holding specialist at HAIMER are pleased about their successful cooperation in the field of volume metal cutting.

Patrik Odermatt (left) and Walter Duss (middle) of the aircraft manufacturer Pilatus and Tobias Völker, tool holding specialist at HAIMER are pleased about their successful cooperation in the field of volume metal cutting.

Fine balanced tools are necessary

Walter Duss, Director Milling, points out that fine-balanced tools are absolutely necessary: “Only the high balancing grade of the complete tool assembly – balanced on a HAIMER balancing machine – together with HAIMER tool holders can guarantee vibration-free machining and surfaces without any chatter marks. Furthermore, the high run-out accuracy significantly increases the lifetime of the spindle and tools.”
According to the experience of Patrik Odermatt, Team Leader Mechanical Processing and responsible for the internal division of tools at Pilatus, high quality tool holders that offer long-term stability and run-out accuracy definitely pay off. It is for this reason that he has been working with HAIMER in Igenhausen for many years. He uses HAIMER Shrink Fit Chucks and High-Precision Collet Chucks together with the corresponding presetting, shrinking and balancing machines that are available at the Pilatus toolshop which serves as their internal tool management service center. “Regarding such topics as quality, price-performance ratio, consultation and support, our experience with HAIMER is very positive” Patrik Odermatt explains. “That’s why we made the decision to continuously and solely rely on tool holding technology from HAIMER when it comes to our new manufacturing system. We exclusively use tools that are clamped into HAIMER Standard Shrink Fit Chucks, ultra-short and long Power Shrink Chucks as well as Power Mini Shrink Chucks, Power Collet Chucks and special Face Mill Arbors.”

 

Developed a program for the inderface added to standard portfolio

Since Pilatus is working with many different parts that are extremely thin with wall thicknesses ≤ 1.2 mm and deep pockets, the wide range of HAIMER tool holders was an important consideration. Also HAIMER has shown flexibility regarding the spindle interface: for the new manufacturing systems a special HSK-A 63/80 tool holder was necessary. After close cooperation with Pilatus, HAIMER developed a program for this interface and added it to its standard delivery portfolio.
HAIMER also proves to be innovation-driven with its patent pending mechanical locking Data-Lock system that fixes the RIFD data carrier onto the tool holder. Pilatus uses this solution to ensure that even at the highest rpm the data carriers are securely fixed and cannot separate from the tool holder.
According to tool expert Odermatt, one of the greatest advantages of working with HAIMER is the fact that you can get all tool holding technology from one single source. “For every HAIMER Shrink Fit Chuck the required parameters are already integrated into the shrinking machines,” stated Odermatt. “The performance and heating time are ideal and guarantee process-reliable shrinking at the push of a button. And balancing is also easy to perform.”

More info about: Haimer

 

Previous GOM > ATOS ScanBox accelerater inspection of body sheet metal parts
Next Harting > Connectors for explosive atmospheres

You might also like

News

Fair Lamiera 2017 > Success for the exhibition for sheet metal forming machine tools

  After the Fair Lamiera 2017 the next appointment will be in 2019.  Exactrly in May 2019 professionals will have the possibility to visit the exhibition for sheet metal forming

Components

BMF > Extensive filtering technology systems

  Extensive filtering technolgy for BBAC in Beijing / China For the second time within a short period, the BMF has proven its competence with a contract from BBAC (Beijing

Machine Tools

Breton > High precision from processing stone materials to machining centres

    Switching from processing stone materials to metals demands a significant increase in precision. Now Breton uses laser interferometers, rotary axis calibrators, ballbar systems and touch-trigger probes thanks to